BBTYS - ECP-PROCESS BLACK CONC. 4811-16, 4811-16-6
- MSDS: BBTYS
- Manufacturer: XEROX
- Product Name: ECP-PROCESS BLACK CONC. 4811-16, 4811-16-6
- National Stock Number: 6850-00F006129
Product Identification
Product ID:ECP-PROCESS BLACK CONC. 4811-16, 4811-16-6
MSDS Date:01/01/1987
FSC:6850
NIIN:00F006129
MSDS Number: BBTYS
Responsible Party
Emergency Phone: (716) 422-2177
Cage: EO916
Contractor
Telephone: 800-828-6571/716-422-2177
Cage: EO916
Ingredients
ISOPARAFFINIC PETROLEUM SOLVENT (NON-AROMATIC NAPHTHA)
Fraction By Weight: 90%
ACGIH TLV: 300 PPM
METHACRYLATE CO-POLYMER (10-20%)
Fraction By Weight: 20%
GRAPHITE, SYNTHETIC
CAS: 7440-44-0
RTECS: FF5250100
Fraction By Weight: 20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 2 MG/M3 TDUST; 9293
Hazards
Effects of Overexposure:INTENTIONAL INHALATION MAY RESULT IN ABNORMAL
HEART RHYTHMS, RESP ARREST, CNS DEPRESSION.
First Aid
First Aid:EYES: FLUSH THOROUGHLY WITH WATER. SKIN: REMOVE CONTAMINATED
CLOTHING. WASH THOROUGHLY WITH SOAP & WATER. INHALATION: REMOVE
FROM EXPOSURE. OBSERVE FOR ANY DIFFICULTY IN BREATHING. INGESTION:
DRINK W/ SEVERAL GLASSES OF WATER. CALL PHYSICIAN.
Fire Fighting
Flash Point:102-107F T.C.C.
Lower Limits:0.8%
Upper Limits:7.0%
Extinguishing Media:FOAM, DRY CHEMICAL, CO2, WATER FOG
Fire Fighting Procedures:AVOID WATER, IT TENDS TO SPREAD HYDROCARBON
SOLVENT FIRES.
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES. RECOVER FREE LIQUID
USING AN ABSORBANT MATERIAL (EARTH, SAN SAWDUST, ETC.)
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED. AVOID HANDLING
NEAR HEAT, STRONG LIGHT, SPARKS, OPEN FLAMES, STRONG OXINTS.
Exposure Controls
Respiratory Protection:NONE
Protective Gloves:NEOPRENE/NITRIL
Eye Protection:NONE
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED: 08/19/85.
Chemical Properties
Boiling Pt:B.P. Text:160-180C
Vapor Pres:1
Vapor Density:5.0
Spec Gravity:.82
Evaporation Rate & Reference:.25-.45 N-BUAC
Solubility in Water:IMMISCIBLE
Appearance and Odor:BLACK LIQUID/SLIGHT ODOR.
Percent Volatiles by Volume:85%
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS, CHLORINE, OXYGEN, CALCIUM HYPOCHLORITE.
Stability Condition to Avoid:AVOID BREATHING VAPORS. AVOID
PROLONGED/REPEATED SKIN CONT.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:DISPOSE OF LIQUID & ABSORBANT AT AN APPROVED
DISPOSAL SITE OR FACILITY. INSURE CONFORMITY WITH FEDERAL, STATE OR
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.